Simple Steps If You Cannot Setup Your 123.hp.com/laserjet

123.hp.com/laserjet

Hewlett-Packard popularly referred to as HP, is one of the most preferred brands by consumers in the world of gadgets. HP offers a wide range of software, hardware devices, and other related services to its users. HP has a very large customer base and to them, it provides world-class products and top-notch customer services.

Getting your printer up and running can be a little daunting so, in this guide, we have compiled steps required to install the software for your Laser Jet Pro printer in Windows on a Wired (123.hp.com/laserjet). What are you waiting for? Let’s get this party started.

Downloading and Installing the printer software for a Wired Ethernet Network on Windows

For the purpose of downloading the software for your printer, HP provides two methods. Both the methods will be discussed in detail below.

1. Method I: Downloading the printer software from 123 hp com/laserjet
2. Begin by connecting the network cable to the printer. Be patient and wait for the printer to identify your network address.
3. If your control panel is a 2 Line Control Panel, you will have to press OK on the control panel. After that you will need to open the Network Setup and select Show IP Address from the drop-down menu.
4. However, in case the control panels are Touchscreen Control Panel, you will have to touch the {Connection Information} button. If your IP address is listed, a successful connection has been established. If it is not listed, you will have to try in another few minutes.
5. After completing the above steps, proceed to 123 hp com/laserjet.
6. Click on download when the download screen pops up.
7. Carefully follow all the steps provided to install the printer software.
8. Method II: Downloading the printer software from the Product Support for HP
9. Begin by connecting the network cable to the printer. Be patient and wait for the printer to identify your network address.
10. For the 2-Line Control Panel, press the Ok button on the control panel. Select IP Address from the drop-down menu available in the Network Setup option.
11. If it is a Touchscreen Control Panel, you will have to touch the [Connection Information] icon. You are all set for the next step of your IP Address is listed, but you will have to try again if your IP Address is not listed.
12. Navigate to support.hp.com.
13. In the Search box type out the name of the printer. Hit the Enter Key on the keyboard.
14. Go to drivers, software and firmware option.
15. If prompted, you will have to select your printer from the list of similar printers in the list.
16. Select your preferred language and your Operating System.
17. Select the Driver- Product Installation Software, and locate the one suitable for your printer.
18. Download the driver that meets your requirements.
19. Follow all the steps provided by the HP Installer to download your printer software.

There is another method available for downloading and installing the printer software for Windows for a wired (123 hp com laserjet) connection using the in-box CD. To download the software using the in-box CD carefully follow the below mentioned steps:

1. Use a network cable to connect your printer to the network. Wait for a few minutes for the printer to identify your network address.
2. If your control panel is a 2-Line Control Panel, go to the printer control panel and press OK. After that open the Network Setup Menu and choose the Show IP Address option from the list.
3. In case of Touchscreen Control Panels, you will have to choose the [Connection Information] button. If your IP Address is listed, you can proceed to the next step. In case it is not listed, you will have to wait for a couple of minutes to try once again.
4. Insert the CD for the printer software in the CD-ROM drive of your computer. The software will detect the language and operating system of your computer. It will display the main menu of the program in the same language as that of your system.
5. In a scenario when the installation does not start downloading on its own in a span of 30 seconds, you should try following the steps given below:
6. Click on Run option available in the Start menu.
7. In the Run option type: X: \SETUP.EXE (X denotes the letter of the CD-ROM Drive).
8. Hit OK, and the installer programme will start.

Using the HP Installer to complete the process of software installation

1. Click on the software that you wish to install for your printer.
2. In case you want to proceed with the recommended software, click on [Next]. However, you should proceed to Customize Software Selection if you want to customize the software for your printer. When the selection gets completed, click on [Next].
3. After you have read the installation agreement, click on <I have read and accepted the Installation Agreements> option. Press [Next] button.
4. Again, click on [Next] when preparation for installation gets completed.
5. Connect the printer to the network and on the Network Product(s) Found screen, select the name of your printer. Click on [Next].
6. The product configuration screen will pop up after your software has been installed. Review the options of configuration. Hit [Next].
7. Configure your printer and click on [Finish] to complete the installation process.

Viola! You have successfully downloaded and installed the software program for your beloved HP printer. As easy as taking a walk in the park, right? Happy Printing!

Conclusion

In this 123 hp com laserjet guide we have made efforts to help you download and install the driver software for your HP printer in an easy way. We sincerely hope that you were able to follow the steps and become a master at operating your HP printer. We understand that sometimes we do not succeed in helping out customers. In such cases, you can always reach out to the customer service at 123 hp com/laserjet. We will be happy to help.